Before inspection and further repairs it is necessary:
Posted: Mon Feb 17, 2025 4:11 am
Freezes when trying to turn on. Red indicators are on the panel, self-diagnostics do not stop.
It does not work and writes an error. The display shows an error code, and the sectors on it may not light up.
Does not wash according to the program. Instead, it performs chaotic actions, instead of 30 minutes it can wash for an hour or two.
The washing temperature regime is not observed. The temperature discrepancy can be determined by the indicator or thermometer, as well as by feeling the glass door.
Chaotic blinking of indicators on the panel. The diodes blink or light up all at once, and incomprehensible symbols appear on the display.
Excessive heating in the area of the engine or heating element. It can be determined by touching the body. But only if there is grounding.
Inadequate drum rotation. The motor may stop in the canada telegram data middle of the wash or suddenly start rotating in the opposite direction.
If these symptoms appear, immediately turn off the washing machine. If they appear after repeated switching on, then something is wrong. It is necessary to distinguish between control unit malfunctions and others. For example, low speed and noise during operation can be caused by slipping of the drive belt. Incorrect temperature can be due to the relay. Some models have a self-diagnosis function that will notify you of malfunctions. Its operation is described in the operating manual, and is usually called by pressing all control buttons at the same time.
How to repair it yourself?
disconnect the machine from the mains;
drain all the water from it;
move the program selector down to turn them off;
turn off the water heating.
Attention: You perform all actions at your own risk.
We strongly recommend calling a technician or buying a new Arcadia module, and never messing with electronics without the appropriate knowledge. First, check the buttons. If they don't always work, then the problem has been found. And make sure all relays and sensors are working properly. Repairs should always start with the simplest. During the repair process, a number of important points need to be determined.
It does not work and writes an error. The display shows an error code, and the sectors on it may not light up.
Does not wash according to the program. Instead, it performs chaotic actions, instead of 30 minutes it can wash for an hour or two.
The washing temperature regime is not observed. The temperature discrepancy can be determined by the indicator or thermometer, as well as by feeling the glass door.
Chaotic blinking of indicators on the panel. The diodes blink or light up all at once, and incomprehensible symbols appear on the display.
Excessive heating in the area of the engine or heating element. It can be determined by touching the body. But only if there is grounding.
Inadequate drum rotation. The motor may stop in the canada telegram data middle of the wash or suddenly start rotating in the opposite direction.
If these symptoms appear, immediately turn off the washing machine. If they appear after repeated switching on, then something is wrong. It is necessary to distinguish between control unit malfunctions and others. For example, low speed and noise during operation can be caused by slipping of the drive belt. Incorrect temperature can be due to the relay. Some models have a self-diagnosis function that will notify you of malfunctions. Its operation is described in the operating manual, and is usually called by pressing all control buttons at the same time.
How to repair it yourself?
disconnect the machine from the mains;
drain all the water from it;
move the program selector down to turn them off;
turn off the water heating.
Attention: You perform all actions at your own risk.
We strongly recommend calling a technician or buying a new Arcadia module, and never messing with electronics without the appropriate knowledge. First, check the buttons. If they don't always work, then the problem has been found. And make sure all relays and sensors are working properly. Repairs should always start with the simplest. During the repair process, a number of important points need to be determined.