The fuse blows and the power turns off if the door is closed.
Posted: Sun Feb 16, 2025 10:16 am
When I press the power button, nothing happens.
First, make sure that voltage is supplied to the internal circuit. If it is not, then the action plan is as follows:
The socket operation is checked. It is best to do this with a multimeter, which will give an unmistakable conclusion. The socket should receive a signal of 220 volts.
The phase potentials are checked. A circuit tester will help with this. At the same time, you can check the working zero and the distance of the plug contacts from the ground. Perhaps there is a break in some part.
If there is no break, you need to pay attention to the input network fuse. Ringing is performed. For this, a wire made of calibrated material, which contains contact pads, is placed in a porcelain or glass base.
To replace a faulty fuse, you need to make a fuse by inserting korea telegram data the same identical element. If you overstate its characteristics, then the next breakdown can lead to the burnout of the entire circuit of the working part.Another feature to consider is the burnout of sensitive electronic components along with the fuse. If they are in perfect order, the case is restored. After that, the proper operation of the stove should be checked by heating, for example, by putting a glass of water.
All parts must be synchronously adjusted and clearly inscribed into the body. The adjoining of the doors to the side, inner and outer parts must be perfect. If the adjustment is incorrect, a short circuit may occur. In the worst case, the fuse will burn out or smog will occur from electromagnetic radiation.
After the allotted time has passed, the microwave oven does not stop operating.
Attention should be focused on the timer, the pulse generation relay and the control module group contacts. The pulses are checked in the following ways.
First, make sure that voltage is supplied to the internal circuit. If it is not, then the action plan is as follows:
The socket operation is checked. It is best to do this with a multimeter, which will give an unmistakable conclusion. The socket should receive a signal of 220 volts.
The phase potentials are checked. A circuit tester will help with this. At the same time, you can check the working zero and the distance of the plug contacts from the ground. Perhaps there is a break in some part.
If there is no break, you need to pay attention to the input network fuse. Ringing is performed. For this, a wire made of calibrated material, which contains contact pads, is placed in a porcelain or glass base.
To replace a faulty fuse, you need to make a fuse by inserting korea telegram data the same identical element. If you overstate its characteristics, then the next breakdown can lead to the burnout of the entire circuit of the working part.Another feature to consider is the burnout of sensitive electronic components along with the fuse. If they are in perfect order, the case is restored. After that, the proper operation of the stove should be checked by heating, for example, by putting a glass of water.
All parts must be synchronously adjusted and clearly inscribed into the body. The adjoining of the doors to the side, inner and outer parts must be perfect. If the adjustment is incorrect, a short circuit may occur. In the worst case, the fuse will burn out or smog will occur from electromagnetic radiation.
After the allotted time has passed, the microwave oven does not stop operating.
Attention should be focused on the timer, the pulse generation relay and the control module group contacts. The pulses are checked in the following ways.