Waterproof connectors are mainly divided into two main categories

[aminaas1576]

Assembly type and pre-wired type
1. Assembly of plug and socket (including wire-to-wire type, wire-to-panel type).

Type L/T/X/H/F has no floor with screw-mounted cable terminal, it is suitable for DIY installation.

2. Pre-wired male-female connector (wire to wire type, wire to panel type, wire to corner type, T/Y/F type), this type is suitable for factory work.

There are several common connection methods for paraguay number data LED waterproof cable connectors.

Plug-in type (plug and socket)
Threaded (threaded rotary connection)
Bayonet (Self-locking/Quick release type)
Compression (Latch Type)
Safety, Installation and Maintenance Tips
Safety
1. When working and installing connectors, please work with the power off to prevent injury from contact with live components.

2. Please do not install the connectors on rainy days, because the rain can easily penetrate into the connectors, which will greatly affect the service life of the cable and may cause short circuit.

Installation
1. Please ensure correct mating according to the interface marking to avoid damaging the connectors or short circuit.

2. When installing male-female connectors, apply moderate force to insert the wires into the connector and tighten the insulation screws on the outer shell.